The Eltek Water Block valve is a safety valve that determines the maximum water flow between 5 and 50 liters per minute. Its function is to measure the flow of water that has passed through the valve. If this amount exceeds the set value, the Eltek Water Block stops the water flow and is closed until user intervention. If the safety valve inside the Water Block does not block free-flowing water, then the maximum water flow should be reset.
It is necessary to release the blockage (safety valve) for adjustment. To do so, unscrew and remove the WATER BLOCK from the water tap. Then open the safety valve by pressing the red button on the water outlet side. – ¾ “- internal thread with inlet connection (North America-GHT / Europe-BSP). – ¾” – threaded connection in the water outlet (North America-GHT / Europe-BSP). – the device must be mounted in a vertical (vertical) position. – the maximum value of the volume of overflowed water is adjustable in 10 positions (10 notches) – each notch increases the set volume 5 +/- 1 l / min.
Specs: 100N/CM2 – T70. MINIMUM WORKING FLOW RATE 2L/MIN.
Suits:
Non-Aquastop hoses that require flow rate / flood protection control.